TV

Universal Remote Control for Element TV [The Full Element TV Remote Codes]

Usually, Element TV comes with its remote control, but if for any reason you lost it and you have just bought a new universal remote control for your Element TV and you need to program it then you are in the right place, we provided bellow all that you need, the Element TV remote code and of course the full guide and steps that you should follow to program your Element EV codes for a universal remote.

The 5 Digits Universal Remote Control Codes For Element TV

  • 12183
  • 11687
  • 10178
  • 11886

Read also: Sanyo Sound bar Remote Codes

The 3 Digits Element EV Codes for Universal Remote

  • 005
  • 048
  • 046
  • 043
  • 076
  • 127
  • 051
  • 004
  • 151
  • 154
  • 153
  • 252
  • 247
  • 121
  • 168
  • 236
  • 231

Element TV Codes for Comcast Xfinity

  • 13559
  • 11886
  • 12964
  • 13907
  • 11687
  • 11864
  • 12260
  • 12183
  • 10178

Element TV Codes For Directv

  • 10178
  • 12183
  • 13907
  • 11687

Verizon Universal Remote codes For Element TV

  • 0293
  • 3264
  • 1927
  • 1283
  • 1736
  • 0827

Verizon Universal Remote Control for Element TV

  • 0293
  • 3264
  • 1927
  • 1283
  • 1736
  • 0827

Cox Element TV codes for Universal Remote

  • 1886
  • 1687
  • 2183

RCA Universal Remote Codes for Element TV

  • 11888
  • 13559
  • 12183
  • 11687
  • 12964
  • 1283

How To Program Universal Remote Control For Element TV

  1. Turn on your Element TV
  2. Make sure your universal remote is facing your TV or any other device.
  3. Look for the Setup option on your universal remote.
  4. Press the Setup button and wait until the tiny light blinks many times.
  5. Look for the device button and press it.
  6. Go now above and pick one code from the list and enter it.
  7. If you have entered the right code the tiny light will turn off, if not that’s mean you haven’t entered the correct code, and simply go for another code.
  8. To make sure that everything is OK press any button on the remote.

Check also: GPX TV Remote Codes

How To Program Universal Remote Control For Element TV (alternative method)

  1. Press and hold down the SETUP button on the remote until the red light on the remote turns on. Release the SETUP button. The red light will remain on.
  2. Press and release the device button on the remote for the type of device you wish to control. The red light will blink once and remain on.
  3. Use the number buttons on the remote to enter the codes shown above. The red light will turn off after entering the fourth digit.
  4. Point the remote at the device. Test the buttons on the remote to see if the device responds as you would expect. If the buttons do not operate the device, return to Step 1 above and use the next code in the list.

If everything thing works with you that’s good if not try to watch this video:

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Check Also

Close
Close