Emerson TV Remote Codes [The Full Code List]
Last Updated on April 30, 2023 by Randall
We can acquire the Emerson TV remote codes for many devices in many brands, and the codes for this Emerson device are listed below; you can locate the Emerson tv universal remote codes from that list.
If any of those codes don’t work to program your Emerson device, try another Emerson tv code and continue the procedure until your device is programmed with the universal remote and the techniques to program your device with remote control are listed below.
The majority of remote controllers are pre-activated, however, they may need to be configured to work properly. Emerson TV remote controllers are replacement devices that must be linked to the television. Emerson TV remote controls are simple to the program since they use a code-based system. To link to the Emerson TV remote control code, you only need to provide the right TV manufacturer’s code. Emerson programming codes may be found on the support page for every remote. It simply takes a few minutes to complete the programming process.
Remote Code for Emerson TV:
| 0490 |
|---|
| 0263 |
| 3031 |
| 3203 |
| 0205 |
| 3005 |
| 3008 |
| 0650 |
| 3010 |
| 3012 |
| 0181 |
Philips Universal Remote 4 Digit Codes for Emerson TV:
| 0104, 0304, 0604 |
|---|
| 0924, 0626, 0826 |
| 0115, 0506, 0706 |
| 0027, 0327, 0128 |
| 0002, 0502, 0006 |
| 0228, 0632, 0134 |
| 0520, 0906, 0316, |
| 0247, 0605, 0705 |
| 0505, 0614, 0324 |
| 0805, 0703, 0903 |
| 0004, 0519, 0106, |
RCA Universal Remote Codes for an Emerson TV:
| 1028 , 1029 , 1030 , 1031 |
|---|
| 1171 , 1177 , 1179 , 1191 |
| 1034 , 1035 , 1036 , 1037 |
| 1073 , 1123 , 1124 , 1162 |
| 1004 , 1006 , 1012 , 1023 |
| 1048 , 1049 , 1196 , 1208 |
| 1042 , 1043 , 1044 , 1046 |
| 1032 , 1033, 1038 ,1039 |
| 1024, 1025 , 1026 , 1027 |
| 1041, 1047 |
How to Program Emerson Universal Remote Without Codes
All of the universal remote codes are scanned in the remote when using the auto search method. It reads each code one at a time to get the right remote code for programming the control with your remote. Follow the steps outlined below:
- “Turn on” the smart device you wish the universal remote to control, such as “TV.”
- Tap the device button (TV, DVD, CBL, and OK/SEL) for 3 seconds to “turn on” the remote. The LED light on the gadget shows that it is ready to program.
- Point the remote at the device and press the “CH+” and “CH-” buttons. On/off signals will be shown on the remote. Continue pressing the “up” or “down” keys until the gadget turns off.
- By pressing the “power” key, you may check the code. The device must be turned on. If it starts, switch the channel to make sure the remote is configured properly.
- To store the code, hit the “device” button. The device’s LED will blink twice to ensure the code has been saved.
See also: Universal Remote Codes for Dynex TV
How to Program Emerson Universal Remote With Manual Method
We can quickly program a universal remote using the keycode, and the keycode identifies the manufacturer and model of your equipment.
- To begin, you must “Turn On The Device.”
- On your “Emerson universal remote,” choose “TV.”
- Now press and hold the Universal Remote’s “Setup button” until the “Light Flash” appears (this indicates that it is in “Learning mode”).
- Finally, type in the “Keycode” that you found in the programming instructions (Instructions Booklet)
- Simply “aim your remote at the TV” and then “Press And Hold The Power” button once you’ve completed this step.
- When the screen turns off, you can release the “Power Button.”
How to Program Emerson Universal Remote With Code Search
If you can’t discover the correct key code for the device right now, you can put your universal remote to a search mode to find it. It’s a manual code that puts the remote into search mode.
- First and foremost, “Turn On The Device.”
- Now tap and hold the “Setup” button for a few seconds.
- Enter the “9-9-1” (three-digit) code
- Hold down the “Power Button” on the remote and then push the Channel up or down buttons until the gadget, in this example your television, “Turns Off.”
Although the above procedure may take a little longer, it is critical to locate your key code. After you’ve completed the steps above, your remote should operate for all of the in-built functionalities.
Conclusion
Let us know what code your favorite universal remote brand configured your gadget with. If you don’t see a code for your remote, please let us know in the comments box and we’ll add it as soon as we can.
Read also: Sharp TV Remote Codes (3, 4, and 5 digits)
