JVC Remote Codes & Program Instructions

Last Updated on January 25, 2022 by Randall

If you do not have JVC universal remote codes, whether three-digit, four-digit or even five-digit codes, you will be unable to program any branded universal remote control. If you want to program your favorite universal remote with your JVC smart tv original remote, you will need the codes, which are listed below.

You should use the codes listed below and the procedures to apply them to program your universal remote with your JVC television. Whether you’re using a Sky remote, a Dish remote, or a Philips universal remote, the codes listed below will undoubtedly assist you.

0060
0026
0197
0069
0242
0923
0012
0065
0067
0141

These codes should work with virtually all JVC remote controllers; if they don’t, try the codes below.

JVC TV’s Universal Remote 4 Digit Codes

1227, 1130, 1131, 1080, 1092, 1117, 1131, 1235, 1288, 1299, 1011, 1012, 1026, 1049, 1052, 1054, 1055

JVC TV’s Universal Remote 3 Digit Codes

065, 067, 089, 013, 054, 055, 060

JVC TV’s Universal Remote 5 Digit Codes

12049, 11670, 11349, 12463, 11245, 107311, 10169, 17706, 11892, 12859, 13829, 10053, 12561, 10683, 14808, 12265, 10463, 19405, 14273, 18016, 12811, 13650, 10650, 10053, 10069, 10160, 1193, 11774

RCA Universal Remote Codes For JVC TV

1159, 1063, 1054, 1285, 1269, 1157, 1055, 1065, 1239, 1013, 1123, 1430, 1066,1067, 1393, 1158, 1060, 1012, 1396, 1182

GE Universal Remote Codes For JVC TV

0247, 0197, 0067, 0923, 0012, 0065, 0026, 0060, 0141, 0069

One For All Remote Codes JVC TV

0247, 0197, 0067, 0923, 0012, 0065, 0026, 0060, 0141, 0069

Philips Universal Remote Codes For JVC TV

0715, 0108, 0802, 0204, 0508, 0607, 0308, 0993, 0326, 0321

Magnavox Universal Remote Codes For JVC TV

0038
0053

How to Program JVC TV Universal Remote Without Codes

All of the universal remote codes are scanned in the remote when using the auto search method. It reads each code one at a time to get the right remote code for programming the control with your remote. Follow the steps outlined below:

“Turn on” the smart device you wish the universal remote to control, such as “TV.”
Tap the device button (TV, DVD, CBL, and OK/SEL) for 3 seconds to “turn on” the remote. The LED light on the gadget shows that it is ready to program.
Point the remote at the device and press the “CH+” and “CH-” buttons. On/off signals will be shown on the remote. Continue pressing the “up” or “down” keys until the gadget turns off.
By pressing the “power” key, you may check the code. The device must be turned on. If it starts, switch the channel to make sure the remote is configured properly.
To store the code, hit the “device” button. The device’s LED will blink twice to ensure the code has been saved.

How to Program JVC TV Universal Remote With Manual Method

We can quickly program a universal remote using the keycode, and the keycode identifies the manufacturer and model of your equipment.

To begin, you must “Turn On The Device.”
On your “JVC TV universal remote,” choose “TV.”
Now press and hold the Universal Remote’s “Setup button” until the “Light Flash” appears (this indicates that it is in “Learning mode”).
Finally, type in the “Keycode” that you found in the programming instructions (Instructions Booklet)
Simply “aim your remote at the TV” and then “Press And Hold The Power” button once you’ve completed this step.
When the screen turns off, you can release the “Power Button.”

How to Program JVC TV Universal Remote With Code Search

If you can’t discover the correct key code for the device right now, you can put your universal remote to a search mode to find it. It’s a manual code that puts the remote into search mode.

First and foremost, “Turn On The Device.”
Now tap and hold the “Setup” button for a few seconds.
Hold down the “Power Button” on the remote and then push the Channel up or down buttons until the gadget, in this example your television, “Turns Off.”

Alternate Method To Setup JVC TV Remote

“Manually Or By TV Remote,” turn on your television.
Simultaneously press the “Mute Button” and “Select” buttons until the “green light blinks” twice.
Use the “Number Key” to input “First Digit,” and then wait for the “green light” on top of the remote to flash twice.
Then type “Four Remaining Digits” into the box.
Place the remote in front of your TV and hit the “OFF” button; your television should now be “Turned Off.”
If your television does not “turn off,” continue the method until your television responds to this universal remote control.

There are a variety of brands that may be used to run this TV, and we’ve listed all of them below. Simply check the codes one by one, and your TV remote code will be set.