Last Updated on April 30, 2023 by Randall
Onn Soundbar is one of the famous soundbars in the market today? But what would you do if you lost your remote control? We are going to talk about Onn Soundbar remote codes so if you need to know how to program your universal remote with your Onn Soundbar just continue reading.
If you bought the universal remote because you’re missing the Onn remote, then that’s a problem, the Onn IR remote is not available separately. But you can upgrade to a wifi voice remote, it will pair with Onn Soundbar and control the volume by wifi instead of IR.
The tv commands on the Onn remote are roku commands, when a roku sees them it initiates a hdmi-cec signal sent over the hdmi to control whatever brand of tv its connected to. All brands of tv that have the hdmi-cec feature respond to the same cec commands no matter what brand it is, that’s why you don’t have to chose tv brand in the roku soundbar unlike other roku where you have to tell it the brand of tv you have.
Check also: Onn Universal Remote codes
One For All Universal Remote Codes For Onn Soundbar
The 4 Digits Onn Soundbar Remote Codes
How To Program Universal Remote Control For Onn Soundbar
Certain universal remotes from Inteset and One-For-All that have Onn code 03061 on board will give access to the roku tv commands via the use of advanced codes these are 5 digit codes for individual functions. The advanced codes for the Onn soundbar tv commands are power-00147, volume up-00134, vol down-00136, and mute-00140.
Read also: Samsung Sound Bar Codes
To map these to keys on the Inteset 422-3 remote and One-For-All urc-7880:
- Turn on your Onn Soundbar device.
- Press and hold Set/Magic for two blinks, and then release.
- Now enter the code 994.
- Tap Set/Magic for one blink.
- Enter the 4 digits code from the list above.
- pick the key.