TV

Pavy Universal Remote Codes & Program Instructions

Do you have an idea on how to program a Pavy Universal remote with various codes for different devices such as LG, insignia, Vizio, element tv…etc? now we are going to mention those Pavy universal remote codes and you can collect them in the below table. If you don’t know how to configure your Pavy universal remote for your device, try the steps below and you’ll be able to operate it with ease. Don’t worry if none of the below codes work for your device; simply try each one at a time until you get connected.

Pavy Universal Remote Codes for LG TV

  • 619
  • 700
  • 910

Pavy Universal Remote Codes List

Admiral500, 501, 610, 614, 615,902
Advent911, 932, 933
Aiko900
Akai601
AOC103, 601, 617
Apex000, 604, 618
Audiovox100, 101, 900, 901
Belcor617
Bell&Howell611, 620
Bradford901
Brockwood617
Broksonic614, 902
Candle601, 619
Celebrity605
Changhong618
Citizen601, 619, 900, 903
Clairtone103
Concerto619
Contec103, 901
Craig901
Crosley301, 303
Crown901
Curtis Mathes100, 102, 301, 400, 401, 402, 405, 500, 603, 606, 611, 619, 620, 621, 903
CXC901
Daewoo100, 101, 617, 900
Daytron617
Dumont617, 700
Durabrand201, 614, 615, 914, 918
Electroband103, 605
Emerson101, 103, 200, 201, 620, 901, 902
Envision601
ESA201, 601, 901, 903
Fisher620, 801
Fujitsu300, 615
Funai201, 615, 901
Futuretec901
GE100, 200, 202, 400, 401, 402, 405, 607, 608, 802
Gibralter601, 617, 700
Goldstar601, 607, 617, 619
Grundy615, 901
Haier914, 918
Hallmark607
Harvard901
Hitachi005, 606, 611, 916, 619
ILO921, 925
Infinity301
Inteq700
Insignia201, 301, 303, 614, 909, 919, 920, 934
JBL000, 301, 604, 618
JCB605
JC Penny202, 400, 402, 405, 601, 607, 608, 609, 617, 800, 903
JVC701
KEC901
Kenwood601, 617
KLH618
KTV103, 601, 901
Konka001, 002, 003, 304, 904
LG619, 700, 910
Logik611
Luxman619
LXI301, 400, 402, 607, 609, 620
Magnavox301, 302, 303, 601, 615, 617, 803, 905, 906, 907, 908, 909
Majestic611
Marantz301, 601
Matsushita004,
Megatron606, 607
MEI103
Memorex004, 104, 607, 611, 614, 615, 620
MGA104, 500, 601, 607, 617
Minutz608
Mitsubishi104, 500, 601, 607, 617
Motorola500, 802
MTC103, 601, 617, 619, 903
Multitech901
NAD603, 607, 609
NEC601, 617, 619
Nikko601, 607, 900
Noshi800
NTC900
Olevia923
Onwa901
Optimus004, 603, 620
Optonica500, 610
Orion614, 615, 902
Panasonic004, 202, 610, 802
Philips301, 601, 617, 803, 905, 906, 907, 908, 909
Philco301, 601, 606, 614, 617
Pilot601, 617
Pioneer600, 603
Polaroid400, 910, 913, 915, 917, 920
Portland617, 900
Prism202
Proscan400, 402
Proton102, 607
Pulsar617, 700
Quasar004, 202, 610, 802
RadioShack400, 402, 607, 610, 617, 619, 620, 621, 901
Rhapsody103
Roomconx614, 615, 902, 924
Runco601, 616, 700
Sampo601
Samsung601, 607, 617, 619, 903, 930
Sansui614, 615, 902
Sanyo620, 801, 931
Scotch607
Scott607, 615, 617, 901, 902
Sears201, 301, 400, 402, 607, 609, 615, 620, 622, 801
Sharp500, 501, 610, 929
Sharp (LCD)500, 501, 610, 929
Shogun617
Signature611
Simpson803
Sony605
Soundesign607, 615, 901
Squareview201
SSS617, 901
Starlite901
Supreme605
Sylvaina201, 301, 601, 901
Symphonic201, 901
Tandy500
Tatung802
Technics004, 202
Techwood202, 619
Teknika104, 301, 605, 611, 615, 617, 619, 900, 901
TMK602, 607, 619
Toshiba609, 613, 620, 903
Trutech101
Victor701
Vidtech607, 617
Vizio927
Wards301, 601, 607, 608, 610, 611, 615, 617, 619
Westinghouse926, 928
White Westinghouse101, 605, 614
Yamaha601, 617
Zenith611, 614, 619, 700, 900

How to Program Pavy Universal Remote Without Codes

  • “Turn on” the smart device you wish the universal remote to control, such as “TV.”
  • Tap the device button (TV, DVD, CBL, and OK/SEL) for 3 seconds to “turn on” the remote. The LED light on the gadget shows that it is ready to program.
  • Point the remote at the device and press the “CH+” and “CH-” buttons. On/off signals will be shown on the remote. Continue pressing the “up” or “down” keys until the gadget turns off.
  • By pressing the “power” key, you may check the code. The device must be turned on. If it starts, switch the channel to make sure the remote is configured properly.
  • To store the code, hit the “device” button. The device’s LED will blink twice to ensure the code has been saved.

How to Program Pavy Universal Remote With Manual Method

  1. To begin, you must “Turn On The Device.”
  2. On your “Pavy universal remote,” choose “TV.”
  3. Now press and hold the Universal Remote’s “Setup button” until the “Light Flash” appears (this indicates that it is in “Learning mode”).
  4. Finally, type in the “Keycode” that you found in the programming instructions (Instructions Booklet)
  5. Simply “aim your remote at the TV” and then “Press And Hold The Power” button once you’ve completed this step.
  6. When the screen turns off, you can release the “Power Button.”

That’s it; your TV should now function flawlessly with the universal remote control. If it doesn’t, try repeating the operation with a new code from the same section of the reference table.

How to Program Pavy Universal Remote With Code Search

  • First and foremost, “Turn On The Device.”
  • Now tap and hold the “Setup” button for a few seconds.
  • Hold down the “Power Button” on the remote and then push the Channel up or down buttons until the gadget, in this example your television, “Turns Off.”

Although the above procedure may take a little longer, it is critical to locate your key code. After you’ve completed the steps above, your remote should operate for all of the in-built functionalities.

Final Words

We hope you’ve configured your Pavy universal remote to work with your device. If you are unable to utilize this remote, try setting up the Pavy universal remote with other codes. The remote will then work smoothly without any interruptions.

See also:

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Close