Sceptre TV Remote Codes & Program Instructions

Last Updated on October 10, 2021 by Randall

A universal remote control may control the Sceptre TV remote codes, and the remote control is configured with all 5-digit universal remote control codes and 4-digit codes. Here is the TV code that should work if you bought a universal remote control and require a remote control code to control your TV flash drive. This code is compatible with all universal remote controls. If the first method fails, try the numbers in the list again.

5 Digit Sceptre TV Remote Code

11217
10000
11360
11599
10878

4 Digit Sceptre TV Universal Remote Codes

0000
0080
0991

Sceptre Remote Codes – 3 Digits

if these 3 codes not work try below once:

2337, 3899, 4886, 2528, 4139, 0149, 1132, 3521, 4071, 5111, 0878, 1217, 1360, 1599, 2506, 1392, 1467, 1365, 1167, 1318, 1814, 0516, 5260, 5367

GE Universal Remote Codes for Sceptre Tv

If you have a GE universal remote control, I have the most up-to-date universal remote control code for you.

149
CL5 Latest Models – 4071, 3521, 1071, 5321, 4101
For CL4 – 3521, 4071, 5111
For CL3 – Use 3521, 4071, 5111
V5- 3521, 4071, 5111
For V3 Models – 3521, 4071, 5111
For CL3 – CL5 New models – 3521, 4071, 5111, 1071, 5321, 4101

GE Universal Remote Codes For Sceptre TV

1167, 1132, 0149, 5260, 5367, 3521, 4071, 5111, 3521, 4071, 5111, 3521, 4071, 5111

RCA Universal Remote Codes For Sceptre TV

11217, 1360, 3899, 12528, 0878, 12506, 1599, 11599, 11360, 13899, 2528, 12337, 1217, 2337, 14139, 2506

Sceptre TV Codes For Xfinity Remote

11360
11217
10878
11599
10000

How to Program a Universal Remote for Sceptre TV

Here’s how to program a universal remote control code into a television stick. To program the remote control, follow the instructions below.

Set “Switch Mode” to TV in step one.

Step 2: While the visible LED flashes twice, choose the button.

Step 3: Type the 5-digit code into the box.

Step 4: Scepter TV for your brand = 11360 11217 10878 11599 10000 Scepter TV for your brand = 11360 11217 10878 11599 10000 Scepter TV for your brand = 11360 11217 10878 11599 10000 Scepter TV for your brand = 11

How to Program Sceptre TV Universal Remote With Manual Method

We can quickly program a universal remote using the keycode, and the keycode identifies the manufacturer and model of your equipment.

To begin, you must first “Turn On The Device.”
On your “Sceptre TV universal remote,” press “TV.”
Now press and hold the Universal Remote’s “Setup button” until the “Light Flash” appears (this indicates that it is in “Learning mode”).
Finally, type in the “Keycode” that you found in the programming instructions (Instructions Booklet)
Simply “aim your remote at the TV” and then “Press And Hold The Power” button once you’ve completed this method.
When the screen turns off, you can release the “Power Button.”

How to pair a universal remote using auto code search with sceptre Tv

Another simple way to configure a universal remote with a Sceptre TV is to use auto code search. It’s the same way we look for auto codes and link remote controls with other devices.

To begin, turn on your sceptre TV. Next, point your remote control to the sceptre TV and click the settings button until the red light blinks. Finally, hit the device type button on your remote control. Press the “TV” button in this scenario.
Then, on the remote, click the Power button and wait for the TV to react.
After turning off Sceptre TV, switch it back on and the auto coding will begin.
The red light blinks twice after the auto code search is completed.
Now that you’ve completed the auto code search using sceptre TV, double-check that all of the buttons are functioning properly.

Conclusion:

The three techniques mentioned here are quite useful for programming your universal remote with the SCEPTRE TV Device, and you must choose codes one by one until your device is connected to the remote control.