TV

Zenith Universal Remote [Program Zenith Universal Remote Control]

Hey there, universal remote controllers! We’ve arrived with the most recent Zenith Universal Remote Codes. We have included all of the zenith universal remote codes here for your convenience. If you don’t know how to program this remote control, we’ve included the most effective approaches as well. Simply check them out below and input the codes according to the instructions, and your device and remote will be linked. So let’s get this party started.

Zenith TV Universal Remote Codes List

101, 142, 149, 177, 201, 224, 225, 229, 237, 153, 154, 172, 401, 460, 461, 498, 501, 502, 521

Zenith Universal Remote Codes List

Brand NameRemote Code
Craig805, 906
Daewoo002, 102, 110, 203, 214, 221, 303, 311, 314
Emerson002, 003, 004, 005, 006, 014, 104, 105
Fisher506, 606, 619, 902
Fujitsu206
Funai206, 805, 906
GE002, 007, 018, 107, 310, 318, 502, 601, 719, 803
Goldstar002, 102, 117, 207, 217, 307, 502, 713, 818, 916
Hitachi002, 016, 116, 218, 310, 315, 415, 502, 507, 516, 619
JVC007, 108, 208, 308, 417, 502, 510, 617, 606, 702, 902
Magnavox002, 008, 109, 118, 209, 309, 402, 408, 502, 508, 510
Memorex102, 502, 506, 601, 701
Mitsubishi002, 102, 114, 206, 502, 509, 510, 619, 709, 803
Panasonic017, 516, 618, 807, 901
Philips002, 009, 109, 202, 209, 221, 310, 402, 408, 502, 508
Proscan601, 719
RCA002, 102, 211, 302, 320, 402, 406, 411, 502, 511, 514
Samsung002, 102, 103, 112, 212, 502, 512, 702, 818, 908
Sansui215
Sanyo002, 312, 412, 506, 619, 902
Sharp002, 013, 111, 502, 712, 812, 813, 918
Sony202, 801
Sylvania002, 009, 109, 117, 209, 309, 402, 408, 502, 508, 717
Symphonic117, 520, 904, 906
Toshiba112, 313, 413, 506, 510, 512, 902
Zenith008, 117, 311, 405, 407, 512, 601, 701, 713, 916

Read also: Cox Cable Remote Codes 8820

RCA Universal Remote Codes For Zenith

1000, 1001, 1004, 1051, 1083, 1151, 1152, 1153, 1154, 1196, 1210, 1217, 1424, 1427, 1428, 1449, 1463, 1464

GE Universal Remote Codes For Zenith

0138, 0245, 0004, 0288, 0058, 0121, 0001, 0038, 0247, 0039, 0266, 0134., 0091, 0153, 0078, 0227, 0111, 0009, 0131, 0252, 0226, 0310, 0050, 0338, 0023, 0358, 0059, 0135, 0064

One-For-All Universal Remote Codes For Zenith

0153, 0121, 0004, 0064, 0131, 0009, 0138, 0111, 0091, 0134., 0078, 0059, 0038, 0050

Philips Universal Remote Codes For Zenith

0903, 0713, 0405, 0430, 0228, 0502, 0507, 0701, 0606, 0710, 0826, 0326, 0407, 0505, 0126, 0916, 0435, 0437, 0002, 0714, 0712, 0324, 0632, 0015, 0008, 0409, 0415, 0115, 0224

Magnavox Universal Remote Codes For Zenith

  • 0015
  • 0077

How To Program Zenith Universal Remote Control with Codes

  1. Turn on the media device you are going to program.
  2. Using your Zenith remote control – Press and hold the “CODE SEARCH” button and wait for the small light to illuminate.
  3. Once the small light on the remote illuminates, release the “CODE SEARCH” button.
  4. Find the button on the Zenith remote control that corresponds to the media device you are going to program. (EX: DVD, SAT, CAB, AUX)
  5. Now press and release the (EX: DVD, SAT, CAB, AUX) button for the media device you are programming.
  6. Find out the code you need for the media device you are setting up.
  7. Once you have found a list of remote codes for the media device you are programming… Enter the 3, 4, or 5 digits remote code into the remote using the number keys.
  8. The small light will turn off once a code is entered.
  9. Now check to be sure the remote code you entered into the Zenith remote is the correct code by pressing CHANNEL UP, VOLUME UP, OR POWER OFF to see if the code you entered is the correct code.
  10. If the media device responds, then you have entered the correct code, if not, keep trying different remote codes by following the same procedure above.

How to Program Zenith Universal Remote With Manual Method

We can quickly program a universal remote using the keycode, and the keycode identifies the manufacturer and model of your equipment.

  • To begin, you must “Turn On The Device.”
  • On your “Zenith universal remote,” choose “TV.”
  • Now press and hold the Universal Remote’s “Setup button” until the “Light Flash” appears (this indicates that it is in “Learning mode”).
  • Finally, type in the “Keycode” that you found in the programming instructions (Instructions Booklet)
  • Simply “aim your remote at the TV” and then “Press And Hold The Power” button once you’ve completed this step.
  • When the screen turns off, you can release the “Power Button.”

That’s it; your TV should now function flawlessly with the universal remote control. If it doesn’t, try repeating the operation with a new code from the same section of the reference table.

How to Program Zenith Universal Remote With Code Search

If you can’t discover the correct key code for the device right now, you can put your universal remote to a search mode to find it. It’s a manual code that puts the remote into search mode.

  • First and foremost, “Turn On The Device.”
  • Now tap and hold the “Setup” button for a few seconds.
  • Hold down the “Power Button” on the remote and then push the Channel up or down buttons until the gadget, in this example your television, “Turns Off.”


Although the above procedure may take a little longer, it is critical to locate your key code. After you’ve completed the steps above, your remote should operate for all of the in-built functionalities.

Conclusion

We have listed all of the Zenith Universal Remote Codes in this blog article; however, if you have any questions regarding the above universal remote codes or if we missed any, please leave a comment and we will correct the errors as well as mention those Zenith remote codes.

See also:

Related Articles

Leave a Reply

Your email address will not be published.

Close